What Does the Memory Usage Warning Message Mean?

If you see a warning message that memory requirements have reached 250 MB it does NOT indicate a problem.

MarketDelta has a built-in warning system designed to alert you if memory usage climbs to abnormal levels. By default, the warning is triggered at 400 MB of memory usage which is considered high. If you routinely see this message because you have an unusually demanding set of charts or technical indicators added to the chart, for example, you may revise the warning threshold to a higher level. This is done by changing the default value in the MarketDelta configuration preferences. Go to the Main Menu, Click Setup menu | Click Configuration. Search for the "MemoryUsageWarningMB" variable | Set the override value to 1024 | Click OK to exit and the new setting will be applied.

MemoryUsageWarningMB=1024

Thereafter, the warning will occur if memory usage reaches 1024 MB. When memory reaches an abnormal level it may indicate a software problem, for example, or a particular chart that is consuming an excessive amount of memory due to incorrect user settings. The warning system is designed to aid in detecting the source of such problems. If you receive the warning when you open a particular chart or after revising the settings of a chart, re-examine the chart settings or share the chart with support to determine the cause.

Complete information on the configuration file can be found at http://support.marketdelta.com/entries/192605.

Have more questions? Submit a request

4 Comments

  • 0
    Avatar
    C. Meadows

    I just received this warning and had made no recent changes to any charts nor opened any new ones.  Can you be more specific as to what event(s) actually trigger this warning?  Are there other parameters that can be changed to reduce the memory load other than just increasing the threshold?  Could it be an excessive amount of history on the charts that could be saved off to a file?  What other means do we have to manage system/memory resource usage?

  • 0
    Avatar
    Lioce1

    Where is the data stored? Can I change the default location to my external drive so I dont consume my hard drive?

  • 0
    Avatar
    Eric Hodges

    Where do I find the configuration file?

  • 0
    Avatar
    Trevor Harnett

    The configuration file can be found at http://support.marketdelta.com/entries/192605.

Article is closed for comments.